JF603 is a single-phase dust extractor with an integrated pre-separator. The extractor and pre-separator are combined in one frame. Confirm the final application, accessories, filter media, collection method, and electrical requirements with JFURTHER before ordering.
Request the JF603 specification sheet or a quotation →
Configuration overview
- Integrated pre-separator: A single-frame configuration for workflows that call for pre-separation before final collection.
- Single-phase power: The published configuration lists 220 V, 50/60 Hz single-phase power.
- Filter cleaning: The published configuration lists electric vibration and blowback vibration dust cleaning. Confirm the final cleaning specification with JFURTHER.
- Application review: Send the material, pickup point, hose arrangement, power supply, operating hours, and collection requirements so the team can confirm the applicable configuration.
특징
드라이빙 팬
The JF603 is equipped with high-quality motor fans: high efficiency, large air volume and high negative pressure. Three motors are built inside the machine cap, each with its own independent switch, so suction and air volume can be matched to the job. The cap is integrally moulded plastic — lighter and durable.
효율적인 정화
The JF603 is equipped with a PTFE-coated filter cartridge: filtration efficiency above 99% for dust at 0.3 μm, so the air leaving the machine is clean.
Refuse to Block
Dust builds up on any cartridge. The JF603 cleans it two ways: electric vibration and blowback vibration dust cleaning, so dust falls off the cartridge surface and ventilation — and suction — stays effective.
연속 배깅 구조
A long transparent plastic bag is folded and fixed on the machine. Pull the bag out as dust collects, tie it off where you want, cut it, and keep working — easy loading, unloading and transport.
Mobile Equipment, Less Effort
Universal brake wheels plus directional wheels: flexible steering, stable walking, easy to move even when the bucket is full.
Professional Accessories, Matching Use
A set of professional D50 standard accessories is included: S-shaped elbow, vacuum floor brush, flat suction nozzle and wear-resistant hose. An optional front wet/dry suction bar (about 70 cm) covers large floors faster.
Published core specifications
| Item | Published specification |
|---|---|
| 모델 | JF603 |
| Power source | Single phase, 220 V, 50/60 Hz |
| 모터 파워 | 3.6 kW |
| Maximum negative pressure | 200 mbar |
| Maximum air volume | 620 m³/h |
| Dust-cleaning method | Electric vibration + blowback vibration |
| Dust bucket capacity | 65 L |
| 무게 | 93 kg |
| 필터 영역 | 3.0 m² |
| Dimensions | 650×1030×1460 mm |
| 소음 | 78±2 dBA |
| Filter type | 수입 폴리에스테르 섬유 PTFE 코팅 필터 배럴 |
| Filtration performance | 0.3um, 최소≥99.5% |
Confirm the final configuration with JFURTHER before ordering.
Frequently asked questions
How does the pre-separator help?
The built-in cyclone pre-separator removes more than 98% of dust before it reaches the main filter, so the filter stays clean longer and service intervals are extended.
How is the filter cleaned?
Two ways: electric vibration and blowback vibration dust cleaning shake dust off the cartridge surface during work, so suction stays up.
How is dust emptied?
Through the continuous bagging structure: pull out the transparent bag, tie it off, cut it, and keep working. The 65L bucket collects the dust.
What accessories are included?
The D50 standard kit: S-shaped elbow, floor brush, flat suction nozzle and wear-resistant hose. An optional front wet/dry suction bar (about 70 cm) is available.
Request configuration guidance
For a relevant recommendation, provide the dust type, expected material volume, tool or machine connection, power supply, and collection requirements, and confirm the final configuration with JFURTHER. Discuss your JF603 application →
KO 
EN 
ES 
PT 
DE 
RU 
AR 
JA